Vertiv Liebert LTS Automatic Transfer Switch - 6 x IEC 60320 C13, 1 x IEC 60320

Reliable Redundant protection to your mission critical ApplicationsThe LTS is a single-pole automatic transfer device with the capacity of 10/16/32 A. It performs the core functions of detection and transfer in the dual-bus system composed of two ways of AC power, and is used in the high-end uninterruptible power supply applications that require high power supply reliability. Redundancy Currently, only the high- end severs are equipped with dual power . Other types of equipment , including hub, exchange, router, elementary server, and specialized instrument and meter. are singlepower products. You can connect the key equipment to two ways of redundant power through LTS. The main power and the standb y power can directly connect to the LTS on the rack can provide redundancy control on the power. Once the main power fails, it will automatically switch to the standby power. Reliability The LTS adopts the control technology of "First Disconnect Then Connect" If one-way power fails, the LTS can ensure the uninterruptible power supply to the equipment through the redundant power supply Once short circuit occurs, the LTS can ensure that the failure will not extend to the standby power, and thus ensure the uninterruptible power supply to the mission critical equipments The LTS is a single-pole automatic transfer device with the capacity of 10/16/32 A. It performs the core functions of detection and transfer in the dual-bus system composed of two ways of AC power, and is used in the high-end uninterruptible power supply applications that require high power supply reliability. Redundant Design To ensure that the equipment can still operate normally upon the failure of one single power .Compact Size Optimized 1U size designed to integrate in same server rackFull DSP ControlE